Saturday, December 31, 2011

ELECTRICAL CIRCUIT LABORATORY ANNA UNIVERSITY SYLLABUS EE2155 | BE 2ND SEMESTER ELECTRICAL CIRCUIT LAB EE 2155 SYLLABUS | EC LAB ANNA UNIVERSITY SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS


EE2155 ELECTRICAL CIRCUIT LABORATORY SYLLABUS
(Common to EEE, EIE and ICE) 

LIST OF EXPERIMENTS
1. Verification of ohm’s laws and kirchoff’s laws.
2. Verification of Thevemin’s and Norton’s Theorem
3. Verification of superposition Theorem


4. Verification of maximum power transfer theorem.
5. Verification of reciprocity theorem
6. Measurement of self inductance of a coil
7. Verification of mesh and nodal analysis.
8. Transient response of RL and RC circuits for DC input.
9. Frequency response of series and parallel resonance circuits.
10. Frequency response of single tuned coupled circuits.

COMPUTER AIDED DRAFTING AND MODELING LABORATORY ANNA UNIVERSITY SYLLABUS ME2155 | BE 2ND SEMESTER COMPUTER AIDED DRAFTING AND MODELING LAB ME 2155 SYLLABUS | CADM LAB ANNA UNIVERSITY SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

ME2155 COMPUTER AIDED DRAFTING AND MODELING LABORATORY SYLLABUS

List of Exercises using software capable of Drafting and Modeling


1. Study of capabilities of software for Drafting and Modeling – Coordinate systems (absolute, relative, polar, etc.) – Creation of simple figures like polygon and general multi-line figures. 


2. Drawing of a Title Block with necessary text and projection symbol. 


3. Drawing of curves like parabola, spiral, involute using Bspline or cubic spline.


 4. Drawing of front view and top view of simple solids like prism, pyramid, cylinder, cone, etc, and dimensioning. 


5. Drawing front view, top view and side view of objects from the given pictorial views (eg. V-block, Base of a mixie, Simple stool, Objects with hole and curves).




 6. Drawing of a plan of residential building ( Two bed rooms, kitchen, hall, etc.)


7. Drawing of a simple steel truss.


8. Drawing sectional views of prism, pyramid, cylinder, cone, etc,


 9. Drawing isometric projection of simple objects. 


10. Creation of 3-D models of simple objects and obtaining 2-D multi-view drawings from 3-D model.


Note: Plotting of drawings must be made for each exercise and attached to the records written by students.


List of Equipments for a batch of 30 students:


1. Pentium IV computer or better hardware, with suitable graphics facility -30 No.
2. Licensed software for Drafting and Modeling. – 30 Licenses
3. Laser Printer or Plotter to print / plot drawings – 2 No.

CHEMISTRY LABORATORY – II ANNA UNIVERSITY SYLLABUS GS2165 | BE 2ND SEMESTER CHEMISTRY LABORATORY – II GS 2165 SYLLABUS | CHEMISTRY LAB ANNA UNIVERSITY SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

GS2165 CHEMISTRY LABORATORY – II SYLLABUS


LIST OF EXPERIMENTS
1. Conduct metric titration (Simple acid base)
2. Conduct metric titration (Mixture of weak and strong acids)
3. Conduct metric titration using BaCl2 vs. Na2 SO4
4. Potentiometric Titration (Fe2+/ KMnO4 or K2Cr2O7)
5. PH titration (acid & base)
6. Determination of water of crystallization of a crystalline salt (Copper sulphate)
7. Estimation of Ferric iron by spectrophotometry.




A minimum of FIVE experiments shall be offered.
 Laboratory classes on alternate weeks for Physics and Chemistry.
 The lab examinations will be held only in the second semester.

PHYSICS LABORATORY – II ANNA UNIVERSITY SYLLABUS GS2165 | BE 2ND SEMESTER PHYSICS LABORATORY – II GS 2165 SYLLABUS | PHYSICS LAB ANNA UNIVERSITY SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS
GS2165 PHYSICS LABORATORY – II SYLLABUS

LIST OF EXPERIMENTS

1. Determination of Young’s modulus of the material – non uniform bending.
2. Determination of Band Gap of a semiconductor material.
3. Determination of specific resistance of a given coil of wire – Carey Foster Bridge.
4. Determination of viscosity of liquid – Poiseuille’s method.
5. Spectrometer dispersive power of a prism.
6. Determination of Young’s modulus of the material – uniform bending.
7. Torsional pendulum – Determination of rigidity modulus.


 A minimum of FIVE experiments shall be offered.
 Laboratory classes on alternate weeks for Physics and Chemistry.
 The lab examinations will be held only in the second semester.

COMPUTER PRACTICE LABORATORY 2 ANNA UNIVERSITY SYLLABUS GE2155 | BE 2ND SEMESTER COMPUTER PRACTICE LABORATORY GE 2155 SYLLABUS | CP II LAB ANNA UNIVERSITY SYLLABUS



APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS


GE2155 COMPUTER PRACTICE LABORATORY – II

LIST OF EXPERIMENTS

1. UNIX COMMANDS

Study of Unix OS - Basic Shell Commands - Unix Editor

2. SHELL PROGRAMMING

Simple Shell program - Conditional Statements - Testing and Loops

3. C PROGRAMMING ON UNIX

Dynamic Storage Allocation-Pointers-Functions-File Handling


HARDWARE / SOFTWARE REQUIREMENTS FOR A BATCH OF 30 STUDENTS

Hardware
 1 UNIX Clone Server
 33 Nodes (thin client or PCs)
 Printer – 3 Nos.

Software
 OS – UNIX Clone (33 user license or License free Linux)
 Compiler - C

BASIC CIVIL MECHANICAL ENGINEERING ANNA UNIVERSITY SYLLABUS GE2152| BE 2ND SEMESTER BASIC CIVIL MECHANICAL ENGINEERING GE 2152 SYLLABUS | BCM ANNA UNIVERSITY SYLLABUS


 APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

GE2152 BASIC CIVIL & MECHANICAL ENGINEERING SYLLABUS - FOR CIRCUIT BRANCHES
(Common to branches under Electrical and I & C Faculty)

A – CIVIL ENGINEERING
UNIT I SURVEYING AND CIVIL ENGINEERING MATERIALS

Surveying: Objects – types – classification – principles – measurements of distances – angles – leveling – determination of areas – illustrative examples. Civil Engineering Materials: Bricks – stones – sand – cement – concrete – steel sections.

UNIT II BUILDING COMPONENTS AND STRUCTURES

Foundations: Types, Bearing capacity – Requirement of good foundations. Superstructure: Brick masonry – stone masonry – beams – columns – lintels – roofing – flooring – plastering – Mechanics – Internal and external forces – stress – strain – elasticity – Types of Bridges and Dams – Basics of Interior Design and Landscaping.

B – MECHANICAL ENGINEERING

UNIT III POWER PLANT ENGINEERING

Introduction, Classification of Power Plants – Working principle of steam, Gas, Diesel,Hydro-electric and Nuclear Power plants – Merits and Demerits – Pumps and turbines – working principle of Reciprocating pumps (single acting and double acting) – Centrifugal Pump.

UNIT IV I C ENGINES

Internal combustion engines as automobile power plant – Working principle of Petrol and Diesel Engines – Four stroke and two stroke cycles – Comparison of four stroke and two stroke engines – Boiler as a power plant.


UNIT V REFRIGERATION AND AIR CONDITIONING SYSTEM
Terminology of Refrigeration and Air Conditioning. Principle of vapour compression and absorption system – Layout of typical domestic refrigerator – Window and Split type room Air conditioner.

REFERENCES: 1. Shanmugam G and Palanichamy M S, “Basic Civil and Mechanical Engineering”,Tata McGraw Hill Publishing Co., New Delhi, (1996).
2. Ramamrutham. S, “Basic Civil Engineering”, Dhanpat Rai Publishing Co. (P) Ltd. (1999).
3. Seetharaman S. “Basic Civil Engineering”, Anuradha Agencies, (2005).
4. Venugopal K and Prahu Raja V, “Basic Mechanical Engineering”, Anuradha Publishers, Kumbakonam, (2000).
5. Shantha Kumar S R J., “Basic Mechanical Engineering”, Hi-tech Publications, Mayiladuthurai, (2000).

BASIC ELECTRICAL AND ELECTRONICS ENGINEERING ANNA UNIVERSITY SYLLABUS GE2151 | BE 2ND SEMESTER BASIC ELECTRICAL AND ELECTRONICS ENGINEERING GE 2151 SYLLABUS | BEEE ANNA UNIVERSITY SYLLABUS


 APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

GE2151 BASIC ELECTRICAL AND ELECTRONICS ENGINEERING SYLLABUS - FOR NON CIRCUIT BRANCHES
(Common to branches under Civil, Mechanical and Technology faculty)

UNIT I ELECTRICAL CIRCUITS & MEASURMENTS

Ohm’s Law – Kirchoff’s Laws – Steady State Solution of DC Circuits – Introduction to AC Circuits – Waveforms and RMS Value – Power and Power factor – Single Phase and Three Phase Balanced Circuits. Operating Principles of Moving Coil and Moving Iron Instruments (Ammeters and Voltmeters), Dynamometer type Watt meters and Energy meters.

UNIT II ELECTRICAL MECHANICS

Construction, Principle of Operation, Basic Equations and Applications of DC Generators, DC Motors, Single Phase Transformer, single phase induction Motor.

UNIT III SEMICONDUCTOR DEVICES AND APPLICATIONS

Characteristics of PN Junction Diode – Zener Effect – Zener Diode and its Characteristics – Half wave and Full wave Rectifiers – Voltage Regulation. Bipolar Junction Transistor – CB, CE, CC Configurations and Characteristics – Elementary Treatment of Small Signal Amplifier.

UNIT IV DIGITAL ELECTRONICS

Binary Number System – Logic Gates – Boolean Algebra – Half and Full Adders – Flip- Flops – Registers and Counters – A/D and D/A Conversion (single concepts)


UNIT V FUNDAMENTALS OF COMMUNICATION ENGINEERING

Types of Signals: Analog and Digital Signals – Modulation and Demodulation: Principles of Amplitude and Frequency Modulations. Communication Systems: Radio, TV, Fax, Microwave, Satellite and Optical Fibre (Block Diagram Approach only).

TEXT BOOKS

1. V.N. Mittle “Basic Electrical Engineering”,Tata McGraw Hill Edition, New Delhi, 1990.
2. R.S. Sedha, “Applied Electronics” S. Chand & Co., 2006.

REFERENCES

1. Muthusubramanian R, Salivahanan S and Muraleedharan K A, “Basic Electrical,
Electronics and Computer Engineering”,Tata McGraw Hill, Second Edition, (2006).
2. Nagsarkar T K and Sukhija M S, “Basics of Electrical Engineering”, Oxford press (2005).
3. Mehta V K, “Principles of Electronics”, S.Chand & Company Ltd, (1994).
4. Mahmood Nahvi and Joseph A. Edminister, “Electric Circuits”, Schaum’ Outline Series, McGraw Hill, (2002).
5. Premkumar N, “Basic Electrical Engineering”, Anuradha Publishers, (2003).

ELECTRIC CIRCUITS AND ELECTRON DEVICES ANNA UNIVERSITY SYLLABUS EC2151| BE 2ND SEMESTER ELECTRIC CIRCUITS AND ELECTRON DEVICES EC 2151 SYLLABUS | ECED ANNA UNIVERSITY SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

EC2151 ELECTRIC CIRCUITS AND ELECTRON DEVICES 
(For ECE, CSE, IT and Biomedical Engg. Branches)

UNIT I CIRCUIT ANALYSIS TECHNIQUES

Kirchoff’s current and voltage laws – series and parallel connection of independent sources – R, L and C – Network Theorems – Thevenin, Superposition, Norton, Maximum power transfer and duality – Star-delta conversion.

UNIT II TRANSIENT RESONANCE IN RLC CIRCUITS

Basic RL, RC and RLC circuits and their responses to pulse and sinusoidal inputs – frequency response – Parallel and series resonances – Q factor – single tuned and double tuned circuits.

UNIT III SEMICONDUCTOR DIODES

Review of intrinsic & extrinsic semiconductors – Theory of PN junction diode – Energy band structure – current equation – space charge and diffusion capacitances – effect of temperature and breakdown mechanism – Zener diode and its characteristics.

UNIT IV TRANSISTORS

Principle of operation of PNP and NPN transistors – study of CE, CB and CC configurations and comparison of their characteristics – Breakdown in transistors – operation and comparison of N-Channel and P-Channel JFET – drain current equation –MOSFET – Enhancement and depletion types – structure and operation – comparison of BJT with MOSFET – thermal effect on MOSFET.
UNIT V SPECIAL SEMICONDUCTOR DEVICES
(Qualitative Treatment only)


Tunnel diodes – PIN diode, varactor diode – SCR characteristics and two transistor equivalent model – UJT – Diac and Triac – Laser, CCD, Photodiode, Phototransistor, Photoconductive and Photovoltaic cells – LED, LCD.

TEXT BOOKS

1. Joseph A. Edminister, Mahmood, Nahri, “Electric Circuits” – Shaum series,Tata McGraw Hill, (2001)
2. S. Salivahanan, N. Suresh kumar and A. Vallavanraj, “Electronic Devices and Circuits”,Tata McGraw Hill, 2nd Edition, (2008).
3. David A. Bell, “Electronic Devices and Circuits”, Oxford University Press, 5Th Edition, (2008).

REFERENCES:

1. Robert T. Paynter, “Introducing Electronics Devices and Circuits”, Pearson Education, 7 th Education, (2006).
2. William H. Hayt, J.V. Jack, E. Kemmebly and steven M. Durbin, “Engineering Circuit Analysis”,Tata McGraw Hill, 6 Th Edition, 2002.
3. J. Millman & Halkins, Satyebranta Jit, “Electronic Devices & Circuits”,Tata McGraw Hill, 2Nd Edition, 2008.

CIRCUIT THEORYANNA UNIVERSITY SYLLABUS EE2151 | BE 2ND SEMESTER CIRCUIT THEORY EE 2151 SYLLABUS | CIRCUIT THEORY SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS


EE2151 CIRCUIT THEORY SYLLABUS - FOR BRANCHES UNDER ELECTRICAL FACULTY  
(Common to EEE, EIE and ICE Branches)

UNIT I BASIC CIRCUITS ANALYSIS

Ohm’s Law – Kirchoffs laws – DC and AC Circuits – Resistors in series and parallel circuits – Mesh current and node voltage method of analysis for D.C and A.C. circuits.

UNIT II NETWORK REDUCTION AND NETWORK THEOREMS
FOR DC AND AC CIRCUITS

Network reduction: voltage and current division, source transformation – star delta conversion. Thevenins and Novton & Theorem – Superposition Theorem – Maximum power transfer theorem – Reciprocity Theorem.

UNIT III RESONANCE AND COUPLED CIRCUITS

Series and paralled resonance – their frequency response – Quality factor and Bandwidth - Self and mutual inductance – Coefficient of coupling – Tuned circuits – Single tuned circuits.

UNIT IV TRANSIENT RESPONSE FOR DC CIRCUITS

Transient response of RL, RC and RLC Circuits using Laplace transform for DC input
and A.C. with sinusoidal input.

UNIT V ANALYSING THREE PHASE CIRCUITS

Three phase balanced / unbalanced voltage sources – analysis of three phase 3-wire and 4-wire circuits with star and delta connected loads, balanced & un balanced – phasor diagram of voltages and currents – power and power factor measurements in three phase circuits.


TEXT BOOKS

1. William H. Hayt Jr, Jack E. Kemmerly and Steven M. Durbin, “Engineering Circuits
Analysis”,Tata McGraw Hill publishers, 6 Th edition, New Delhi, (2002).
2. Sudhakar A and Shyam Mohan SP, “Circuits and Network Analysis and Synthesis”,Tata McGraw Hill, (2007).

REFERENCES

1. Paranjothi SR, “Electric Circuits Analysis,” New Age International Ltd., New Delhi, (1996).
2. Joseph A. Edminister, Mahmood Nahri, “Electric circuits”, Schaum’s series, Tata
McGraw-Hill, New Delhi (2001).
3. Chakrabati A, “Circuits Theory (Analysis and synthesis), Dhanpath Rai & Sons, New Delhi, (1999).
4. Charles K. Alexander, Mathew N.O. Sadik, “Fundamentals of Electric Circuits”, Second Edition, McGraw Hill, (2003).

ENGINEERING MECHANICS ANNA UNIVERSITY SYLLABUS ME2151 | BE 2ND SEMESTER ENGINEERING MECHANICS ME2151 SYLLABUS | ENGINEERING MECHANICS SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

ME2151 ENGINEERING MECHANICS SYLLABUS - FOR NON CIRCUIT BRANCHES

UNIT I BASICS & STATICS OF PARTICLES

Introduction – Units and Dimensions – Laws of Mechanics – Lame’s theorem, Parallelogram and triangular Law of forces – Vectors – Vectorial representation of forces and moments – Vector operations: additions, subtraction, dot product, cross product – Coplanar Forces – Resolution and Composition of forces – Equilibrium of a particle – Forces in space – Equilibrium of a particle in space – Equivalent systems of forces – Principle of transmissibility – Single equivalent force.

UNIT II EQUILIBRIUM OF RIGID BODIES

Free body diagram – Types of supports and their reactions – requirements of stable equilibrium – Moments and Couples – Moment of a force about a point and about an axis – Vectorial representation of moments and couples – Scalar components of a moment – Varignon’s theorem – Equilibrium of Rigid bodies in two dimensions – Equilibrium of Rigid bodies in three dimensions – Examples

UNIT III PROPERTIES OF SURFACES AND SOLIDS

Determination of Areas and Volumes – First moment of area and the Centroid of sections – Rectangle, circle, triangle from integration – T section, I section, - Angle section, Hollow section by using standard formula – second and product moments of plane area – Rectangle, triangle, circle from integration – T section, I section, Angle section, Hollow section by using standard formula – Parallel axis theorem and perpendicular axis theorem – Polar moment of inertia – Principal moments of inertia of plane areas – Principal axes of inertia – Mass moment of inertia – Derivation of mass moment of inertia for rectangular section, prism, sphere from first principle – Relation to area moments of inertia.

UNIT IV DYNAMICS OF PARTICLES

Displacements, Velocity and acceleration, their relationship – Relative motion – Curvilinear motion – Newton’s law – Work Energy Equation of particles – Impulse and Momentum – Impact of elastic bodies.

UNIT V FRICTION AND ELEMENTS OF RIGID BODY DYNAMICS

Frictional force – Laws of Coloumb friction – simple contact friction – Rolling resistance – Belt friction. Translation and Rotation of Rigid Bodies – Velocity and acceleration – General Plane motion.

TEXT BOOK


1. Beer, F.P and Johnson Jr. E.R. “Vector Mechanics for Engineers”, Vol. 1 Statics and Vol. 2 Dynamics, McGraw-Hill International Edition, (1997).

REFERENCES

1. Rajasekaran, S, Sankarasubramanian, G., “Fundamentals of Engineering Mechanics”, Vikas Publishing House Pvt. Ltd., (2000).
2. Hibbeller, R.C., “Engineering Mechanics”, Vol. 1 Statics, Vol. 2 Dynamics, Pearson Education Asia Pvt. Ltd., (2000).
3. Palanichamy, M.S., Nagam, S., “Engineering Mechanics – Statics & Dynamics”, Tata McGraw-Hill, (2001).
4. Irving H. Shames, “Engineering Mechanics – Statics and Dynamics”, IV Edition – Pearson Education Asia Pvt. Ltd., (2003).
5. Ashok Gupta, “Interactive Engineering Mechanics – Statics – A Virtual Tutor (CDROM)”, Pearson Education Asia Pvt., Ltd., (2002).

ENGINEERING CHEMISTRY 2 ANNA UNIVERSITY SYLLABUS CY2161 | BE 2ND SEMESTER ENGINEERING CHEMISTRY II CY2161 SYLLABUS | ENGINEERING CHEMISTRY II CY 2161 SYLLABUS


 APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

CY2161 ENGINEERING CHEMISTRY – II SYLLABUS

UNIT I ELECTROCHEMISTRY

Electrochemical cells – reversible and irreversible cells – EMF – measurement of emf – Single electrode potential – Nernst equation (problem) – reference electrodes –Standard Hydrogen electrode -Calomel electrode – Ion selective electrode – glass electrode and measurement of pH – electrochemical series – significance – potentiometer titrations (redox - Fe²+vs dichromate and precipitation – Ag + vs CI- titrations) and conduct metric titrations (acid-base – HCI vs, NaOH) titrations,

UNIT II CORROSION AND CORROSION CONTROL

Chemical corrosion – Pilling – Bedworth rule – electrochemical corrosion – different types – galvanic corrosion – differential aeration corrosion – factors influencing corrosion – corrosion control – sacrificial anode and impressed cathodic current methods – corrosion inhibitors – protective coatings – paints – constituents and functions – metallic coatings – electroplating (Au)
and electroless (Ni) plating.

UNIT III FUELS AND COMBUSTION

Calorific value – classification – Coal – proximate and ultimate analysis metallurgical coke – manufacture by Otto-Hoffmann method – Petroleum processing and fractions – cracking – catalytic cracking and methods-knocking – octane number and cetane number – synthetic petrol – Fischer Tropsch and Bergius processes – Gaseous fuels- water gas, producer gas, CNG and LPG, Flue gas analysis – Orsat apparatus – theoretical air for combustion.

UNIT IV PHASE RULE AND ALLOYS


Statement and explanation of terms involved – one component system – water system –
condensed phase rule – construction of phase diagram by thermal analysis – simple eutectic systems (lead-silver system only) – alloys – importance, ferrous alloys – nichrome and stainless steel – heat treatment of steel, non-ferrous alloys – brass and bronze.

UNIT V ANALYTICAL TECHNIQUES
Beer-Lambert’s law (problem) – UV-visible spectroscopy and IR spectroscopy – principles – instrumentation (problem) (block diagram only) – estimation of iron by colorimetry – flame photometry – principle – instrumentation (block diagram only) – estimation of sodium by flame photometry – atomic absorption spectroscopy – principles – instrumentation (block diagram only) – estimation of nickel by atomic absorption spectroscopy.

TEXT BOOKS
1. P.C.Jain and Monica Jain, “Engineering Chemistry” Dhanpat Rai Pub, Co., New Delhi (2002).
2. S.S.Dara “A text book of Engineering Chemistry” S.Chand & Co.Ltd., New Delhi (2006).
REFERENCES
1. B.Sivasankar “Engineering Chemistry” Tata McGraw-Hill Pub.Co.Ltd, New Delhi (2008).
2. B.K.Sharma “Engineering Chemistry” Krishna Prakasan Media (P) Ltd., Meerut (2001).

ENGINEERING PHYSICS 2 PH2161 ANNA UNIVERSITY SYLLABUS | BE 2ND SEMESTER ENGINEERING PHYSICS II PH2161 SYLLABUS | ENGINEERING PHYSICS PH 2161 SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS
  
PH2161 ENGINEERING PHYSICS II

UNIT I CONDUCTING MATERIALS

Conductors – classical free electron theory of metals – Electrical and thermal conductivity  Wiedemann – Franz law – Lorentz number – Draw backs of classical theory – Quantum theory – Fermi distribution function – Effect of temperature on Fermi Function – Density of energy states – carrier concentration in metals.

UNIT II SEMICONDUCTING MATERIALS

Intrinsic semiconductor – carrier concentration derivation – Fermi level – Variation of Fermi level with temperature – electrical conductivity – band gap determination – extrinsic semiconductors – carrier concentration derivation in n-type and p-type semiconductor – variation of Fermi level with temperature and impurity concentration – compound semiconductors – Hall effect – Determination of Hall coefficient – Applications.

UNIT III MAGNETIC AND SUPERCONDUCTING MATERIALS

Origin of magnetic moment – Bohr magneton – Dia and para magnetism – Ferro magnetism – Domain theory – Hysteresis – soft and hard magnetic materials – anti – ferromagnetic materials – Ferrites – applications – magnetic recording and readout – storage of magnetic data – tapes, floppy and magnetic disc drives. Superconductivity : properties - Types of super conductors – BCS theory of superconductivity(Qualitative) - High Tc superconductors – Applications of superconductors – SQUID, cryotron, magnetic levitation.

UNIT IV DIELECTRIC MATERIALS


Electrical susceptibility – dielectric constant – electronic, ionic, orientational and space charge polarization – frequency and temperature dependence of polarisation – internal field – Claussius – Mosotti relation (derivation) – dielectric loss – dielectric breakdown – uses of dielectric materials (capacitor and transformer) – ferroelectricity and applications.

UNIT V MODERN ENGINEERING MATERIALS

Metallic glasses: preparation, properties and applications. Shape memory alloys (SMA): Characteristics, properties of NiTi alloy, application, advantages and disadvantages of SMA Nanomaterials: synthesis –plasma arcing – chemical vapour deposition – sol-gels – electrodeposition – ball milling - properties of nanoparticles and applications. Carbon nanotubes: fabrication – arc method – pulsed laser deposition – chemical vapour deposition - structure – properties and applications.

TEXT BOOKS
1. Charles Kittel ‘ Introduction to Solid State Physics’, John Wiley & sons, 7Th edition, Singapore (2007)
2. Charles P. Poole and Frank J.Ownen, ’Introduction to Nanotechnology’, Wiley India(2007) (for Unit V)

REFERENCES
1. Rajendran, V, and Marikani A, ‘Materials science’Tata McGraw Hill publications, (2004) New delhi.
2. Jayakumar, S. ‘Materials science’, R.K. Publishers, Coimbatore, (2008).
3. Palanisamy P.K, ‘Materials science’, Scitech publications(India) Pvt. LTd., Chennai, second Edition(2007)
4. M. Arumugam, ‘Materials Science’ Anuradha publications, Kumbakonam, (2006).

MATHEMATICS 2 MA2161 ANNA UNIVERSITY SYLLABUS | BE 2ND SEMESTER MATHEMATICS II MA 2161 SYLLABUS | ENGINEERING MATHEMATICS II SYLLABUS


APPLICABLE TO CHENNAI,MADURAI,COIMBATORE,TRICHY,TRINELVELI AND ALL DISTRICT COLLEGES FIRST YEAR SECOND SEMESTER STUDENTS

MA2161 MATHEMATICS II SYLLABUS

UNIT I ORDINARY DIFFERENTIAL EQUATIONS

Higher order linear differential equations with constant coefficients – Method of variation of parameters – Cauchy’s and Legendre’s linear equations – Simultaneous first order linear equations with constant coefficients.

UNIT II VECTOR CALCULUS
Gradient Divergence and Curl – Directional derivative – Irrotational and solenoidal vector fields– Vector integration – Green’s theorem in a plane, Gauss divergence theorem and stokes’theorem (excluding proofs) – Simple applications involving cubes and rectangular parallelpipeds.

UNIT III ANALYTIC FUNCTIONS
Functions of a complex variable – Analytic functions – Necessary conditions, Cauchy – Riemann equation and Sufficient conditions (excluding proofs) – Harmonic and orthogonal properties of analytic function – Harmonic conjugate – Construction of analytic functions – Conformal mapping : w= z+c, cz, 1/z, and bilinear transformation.

UNIT IV COMPLEX INTEGRATION
Complex integration – Statement and applications of Cauchy’s integral theorem and Cauchy’s integral formula – Taylor and Laurent expansions – Singular points – Residues – Residue theorem – Application of residue theorem to evaluate real integrals – Unit circle and semicircular contour(excluding poles on boundaries).

UNIT V LAPLACE TRANSFORM
Laplace transform – Conditions for existence – Transform of elementary functions – Basic properties – Transform of derivatives and integrals – Transform of unit step function and impulse functions – Transform of periodic functions. Definition of Inverse Laplace transform as contour integral – Convolution theorem (excluding proof) – Initial and Final value theorems – Solution of linear ODE of second order with constant
coefficients using Laplace transformation techniques.


TEXT BOOK
1. Bali N. P and Manish Goyal, “Text book of Engineering Mathematics”, 3Rd Edition, Laxmi Publications (p) Ltd., (2008).
2. Grewal. B.S, “Higher Engineering Mathematics”, 40Th Edition, Khanna Publications, Delhi,(2007).


REFERENCES
1. Ramana B.V, “Higher Engineering Mathematics”,Tata McGraw Hill Publishing Company, New Delhi, (2007).
2. Glyn James, “Advanced Engineering Mathematics”, 3 Rd Edition, Pearson Education, (2007).
3. Erwin Kreyszig, “Advanced Engineering Mathematics”, 7Th Edition, Wiley India, (2007).
4. Jain R.K and Iyengar S.R.K, “Advanced Engineering Mathematics”, 3
Rd Edition, Narosa Publishing House Pvt. Ltd., (2007).