## Wednesday, March 7, 2012

### EC2151 ELECTRIC CIRCUITS AND ELECTRON DEVICES QUESTION BANK | EC2151 ECED ANNA UNIVERSITY QUESTION BANK

ANNA UNIVERSITY,CHENNAI

EC2151 ELECTRIC CIRCUITS AND ELECTRON DEVICES QUESTION BANK

BE/BTECH SECOND SEMESTER

UNIT 1

1. Define charge and current.
2. Define voltage and power.
3. Distinguish between ideal and practical voltage source.
4. Distinguish between ideal and practical current source.
5. Define resistivity.
6. What is known as Network?
7. State Ohms law.
8. State KVL and KCL.
9. What is voltage division formula?
10. What is current division formula?
11. What is the criterion to use mesh analysis?
12. What is the criterion to use nodal analysis?
13. State linearity.
14. State Superposition Theorem.
15. State Thevenins Theorem.
16. State Norton’s Theorem.
17. State Maximum Power transfer Theorem.
18. What are the limitations of Thevenins theorem?
19. What are the limitations of Norton’s theorem?
20. Give some applications of superposition theorem.
UNIT II
1. What is meant by sinusoidal steady state analysis?.
2. What is known as phasor diagram
3. Define RMS value
4. What is meant by form factor?
5. What is meant by peak factor?
6. What is the use of superposition theorem?
7. Draw simple RLC circuit.
8. Draw simple RL circuit
9. Draw simple RC circuit
10. Define power factor for RL, RC and RLC circuit
11. Draw the phasor diagram for R, L& C Circuits.
12. Draw the phasor diagram for RL and RC Circuits.
13. Draw the phasor diagram for RLC Circuit.
14. What is meant by complex circuit?
15. Define complex power.
16. Define: Q factor
17. What is single tuned circuit?.
18. What is double tuned circuit?
19. What are Parallel and series resonances?.
UNIT III
1. What is the difference between Intrinsic & extrinsic semiconductor?
2. Draw the energy band diagram for conductor, insulator and semiconductor?
3. Why silicon is always preferred than germanium?
4. What are the difference between N type & P type semiconductor? Give example?
5. What is Fermi Dirac distribution function?
6. What is Fermi level?
7. What are the difference between drift and diffusion current?
8. Write down the diode current equation?
9. What is mobility?
10. What is knee voltage?
11. What is the difference between diffusion and transition capacitance?
12. Draw the energy band structure of pn junction diode
13. What is diode storage and reverse recovery time?
14. What is peak inverse voltage?
15. Draw the VI characteristic of Zener diode?
16. What is the difference between avalanche and Zener breakdown?
17. What are the application of Zener diode?
18. Draw the energy band diagram of intrinsic semiconductor?
UNIT IV
1. Draw the symbol for PNP /NPN transistor?
2. What is transistor ?
3. What is rise time ,delay time,fall time?
4. What is pinch off voltage ? what is cutoff voltage?
5. Compare BJT and FET?
6. Compare FET and MOSFET/
7. What is q point or operating point ?
8. What is ac and dc load line?
9. What is thermal runaway?
10. What is heat sink?
11. What is stability factor?
12. Compare depletion and enhancement MOSFET?
13. Draw the symbol of n channel and p channel JFET ?
14. Draw the symbol of depletion and enhancement MOSFET?
15. Wht base of transistor is made thin?
16. Why emitter is heavily doped?
17. What is active/saturation/cutoff region?
18. What is early effect or base width modulation?
UNIT V
1. What is holding current?
2. What are the applications of SCR?
3. What is thyristor?Why it is called a Triggering device?
4. What is unidirectional and bidirectional Thyristor?Give example?
5. Draw the two transistor version of SCR?
6. Compare TRIAC and DIAC?
7. What are the application of TRIAC/DIAC?
8. What is UJT?
9. What is intrinsic stand off ration?
10. Compare LED and LCD?
11. What is photodiode /photo transistor?
12. What is optocoupler? What are its applications?
13. What is solar cell?
14. Explain field effect or twisted neumatic LCD?
15. Draw the characteristic of UJT and identify the negative resistance region?
16. Explain regenerative action of SCR?
17. What is photo voltic voltage of solarcell?
18. What are the materials used for the construction of LED?
19. Draw the structure of Smectic ,Nematic and cholestic LCD?
20. What is tunneling effect?
21. What are the application of tunnel diode?

### GE2151 BASIC CIVIL AND MECHANICAL ENGINEERING QUESTION BANK | GE2151 BCM ANNA UNIVERSITY QUESTION BANK UNIT 1UNIT2,UNIT3,UNIT4,UNIT5

GE2151 Basic Civil and Mechanical Engineering
QUESTION BANK
Sub. Name: Basic Civil and Mechanical Engineering Year/Sem: I/II
UNIT-I
SURVEYING AND CIVIL ENGINEERING MATERIALS
PART-A (2 Marks)
1. What is surveying?
2. what is the objective of surveying?
3. what is the difference between a plan and a map?
4. what are the two major types of surveying
5. Differentiate between plane surveying and geodetic surveying?
6. How the surveying is classified based on purpose
7. State the principles of surveying.
8. What are the accessories used in chain surveying?
9. Define bearing of a line.
10. What are the systems of bearing
11. What is meant by local attraction & state its effects?
12. Define leveling and state its objectives
13. Define benchmark and state its effects
14. How rocks are classified?
15. What is quarrying & dressing of stones
16. What are the uses of stones?
17. State the uses of cement?
18. State the properties of cement concrete.
19. What is proportioning of concrete?
20. Define workability of concrete.
PART-B (16 Marks)
1. Explain with neat sketch prismatic compass and principles of compass surveying. (16)
2. Explain with neat sketch 20m chain and principles of chain surveying. (16)
3. The following staff readings were observed successively with level, the instrument
having been shifted after second and fifth readings
0.870; 1.635; 2.135; 1.280; 2.980
3.125; 0.120; 1.825; 2.765; 2.015
the first reading was taken with the staff held upon a bench mark of elevation +
100.00. Enter the readings in level book and final reduced levels. Apply the usual
checks. Find also the difference in level between the first and last points (16)
4. What are the requirements of good building stone & state important varieties of
Building stones (16)
5 The following perpendicular offset were taken at 10 meter intervals from an
Survey line to an irregular boundary line 3.145m, 4.30m, 8.20m, 5.60m,7.60m, 4.2m, 5.6m, 4.3m.
Calculate the area enclosed between the survey line, the irregular boundary line, and first and last offsets by the application of a) Average ordinate method b) Trapezoidal rule and c) Simpson’s rule (16)
6. What are the different types of cement? Explain the properties and uses? (16)
7. What are the different types of steel? Explain the properties and uses? (16)

UNIT-II
BUILDING COMPONENTS AND STRUCTURES
PART-A
1. State the objectives and requirements of good foundation?
2. Differentiate between shallow foundation and deep foundation.
3. Define bearing capacity of soil.
4. How the stone masonry is classified?
5. Define the following terms.
i) Corbel
ii) Cornice
iii) Coping
iv) String course
v) Through stone
6. Compare stone masonry and Brick masonry
7. Why bonding in brick wall is essential?
8. State the special features of English and Flemish bond.
9. Define beam, column and Lintel.
10. Classify the types of column based on its conditions.
11. State the purpose of plastering.
12. Define Dam, Bridge and classify them
13. What are the basic components of a bridge?
14. What is the purpose of reinforced concrete?
15. Define factor of safety.

PART-B (16 Marks)
1. a. List the six important points to be considered while selecting a site for construction of Dam.
b. Explain differential leveling with a neat sketch.
2. Explain with neat sketch the different types of piles.
3. List out the different types of bond in brick wall and explain any three in detail.
4. Draw a neat sketch of a reinforced cement concrete column and explain.
5. Explain the types of floor suitable for residential and commercial building.
6. Explain briefly the different types of pitched roof coverings.
UNIT- III
POWER PLANT ENGINEERING
PART-A (2 Marks)
1. What are the types of power plant?
2. What are the parts of thermal power plant?
3. What is the purpose of Surge tank in hydro power plant?
4. Classify the hydro power plant.
5. What is the function of Draft tube?
6. Define Nuclear Fission. Write chain reaction.
7. What is the function of Moderator?
8. Write down the Merits and Demerits of Disel engine power plant.
9. List out the parts of the Gas turbine power plant.
10. Define Pump and Turbine.
11. Define Cavitations.
12. Define Primiming in Centrifugal Pump.
13. What is impulse turbine? Give example
14. What is Reaction turbine? Give example.
PART-B (16 Marks)
1. Explain working principle of thermal Power plant With Neat sketch. (16)
2. Explain working principle of Nuclear Power plant With Neat sketch. (16)
3. a) Explain working principle of Hydro Electric Power plant With Neat sketch. (12)
4. a) Explain working principle of Disel Engine Power plant With Neat sketch. (12)
5. a) Explain working principle of Gas turbine Power plant With Neat sketch. (12)
6. a) With the help of a neat sketch explain the working of Reciprocating Pump (8)
b) With the help of a neat sketch explain the working of Impulse Turbine (8)
7. a) With the help of a neat sketch explain the working of Centrifugal Pump (8)
b) With the help of a neat sketch explain the working of Impulse Turbine (8)
UNIT IV
INTERNAL COMBUSTION ENGINES
PART-A (2 Marks)
1. What is heat engine?
2. Define I.C Engine and E.C. Engine
3. Classify the I.C engine.
4. List out the Part of the I.C. Engine
6. Define the term: Compression Ratio.
7. What do you understand by Scavenging?
8. Define Boiler.
9. Classify Boilers.
10. Define fire tube boiler and water tube boiler.
11. List out the Boiler Mountings and Accessories.
12. What is the Purpose of a fusible Plug?
PART-B (16 Marks)
1. Describe the principal parts and functions of a Four Stroke Disel engine With Neat Sketch (16)
2. Describe the principal parts and functions of a Four Stroke Petrol engine With Neat Sketch (16)
3. Describe the principal parts and functions of a Two Stroke Disel engine With Neat Sketch (16)
4. Describe the principal parts and functions of a Two Stroke Petrol engine With NeatSketch (16)
5. Describe the principal parts and functions of any one high pressure boiler With NeatSketch (16)
6. Describe the principal parts and functions of Babcock Wilcox boiler With Neat Sketch (16)
UNIT V
REFRIGERATION & AIR CONDITIONING
PART-A (2 Marks)
1. Define Refrigeration.
2. Define refrigerant
3. Define C.O.P.
4. Define refrigerant. Give some examples of refrigerant.
5. Give some properties of good refrigerant.
6. Mention some of the applications of refrigeration.
7. Define relative humidity
8. Define psychrometry.
9. Define DBT and WBT.
10. What is a dew point temperature?
11. Define humidity
12. Mention the classification of air conditioning system.
13. Define year–round air conditioning system
PART-B (16 Marks)
1. Explain the principle and working of vapour compression refrigeration system
2. Explain the principle and working of the vapour absorption refrigeration system
3. Give the comparison of vapour absorption with vapour compression refrigerationsystem
4. Explain the summer air-conditioning system for hot and dry weather
5. With the neat sketch explain the layout of a window room air conditioning
6. Explain the layout of the split type air conditioning system
7. Mention and explain the different types of refrigerant used
8. Explain the advantages and disadvantages of the window air conditioning unit

### ANNA UNIVERSITY TIRCHY BE PART TIME PROVISIONAL EXAMINATION RESULT NOVEMBER / DECEMBER 2011 ANNOUNCED

ANNA UNIVERSITY TIRCHY BE PART TIME PROVISIONAL EXAMINATION RESULT NOVEMBER / DECEMBER  2011 ANNOUNCED

à®…à®£்à®£ா à®¤ொà®´ிà®²்à®¨ுà®Ÿ்à®ªà®ª் à®ªà®²்à®•à®²ைà®•்à®•à®´à®•à®®் à®¤ிà®°ுà®š்à®šிà®°ாà®ª்à®ªà®³்à®³ி
ANNA UNIVERSITY OF TECHNOLOGY, TIRUCHIRAPPALLI
TIRUCHIRAPPALLI - 620 024

BE PART TIME PROVISIONAL EXAMINATION RESULT NOV / DEC - 2011

 Registration No.             Clear ANNA UNIVERSITY TIRCHY BE PART TIME PROVISIONAL EXAMINATION RESULT NOVEMBER / DECEMBER  2011 CLICKHERE