Saturday, November 17, 2012

IMPORTANT QUESTIONS IN CS2304 SYSTEM SOFTWARE FOR ANNA UNIV NOV/DEC 2012 EXAMINATIONS

Anna University, Chennai Nov/Dec 2012 Examinations
Rejinpaul.com Important Questions
CS2304 - SYSTEM SOFTWARE
Common To V Sem CSE
Unit I-V

1.     Explain the SIC machine architecture in detail
2.     Explain in detail, the architecture of SIC/XE machine
3.     Explain the different addressing modes of SIC machine
4.     Compare SIC with SIC/XE  machine architecture in detail
5.     Write an Algorithm for Pass 1&Pass 2 of the Assembler
6.     Define the basic functions of assembler and explain in detail the two-pass assembler algorithm with an example
7.      What is Forward reference? Explain one pass assembler with an example
8.     Explain machine independent assembler features
9.     Explain in detail about machine independent Loaders features
10.Explain the following (i) Assemble and go loader (ii) ) Overlays
11. Write short notes on (i)Linkage Editor (ii)Dynamic Linking
12.Explain about machine independent macro processor features
13. Explain about MASM Macro processor and Keyword macro parameters in detail
14.Explain the structure of text editor with a neat sketch
15. Discuss interactive debugging systems in detail
16.Describe the User Interface Criteria in detail.





Ce 2204 Surveying I Important Questions Anna University Nov/Dec 2012 Examinations


Anna University, Chennai Nov/Dec 2012 Examinations
Rejinpaul.Com Important Questions
Ce 2204 Surveying I
Common To III Sem Civil
Unit I-V
1.     Illustrate with neat sketches, various types of obstacles encountered in chain surveying.
            2.     Explain the method of reciprocal and direct  ranging in detail.
3.     What are the equipments used to measure right angle in the chain surveying?
4.     . List the different types of errors in survey measurement and state their significance
             5.     Explain the of plane table surveying in detail and steps involved in setting up of a Plane Table.
6.     What are the precautions to be adopted in using the Compass?
7.      Explain radiation and intersection.
8.     Explain Bessel’s method and two point problem with diagram
9.     Enlist and explain the types of errors in leveling.
10.Write about the Prismoidal Correction to be applied to volume computation
11. Enlist the classification of levelling and explain each of them in detail
12.What are the uses of contours? Discuss in detail
13. Describe in detail about temporary and permanent adjustment in a theodolite
14.State and explain omitted measurements in theodolite surveying
15. Enumereate the different parts of a vernier theodolite and explain their function
16.Briefly explain ‘reverse curves’ and ‘shift of a transition curve’
17. Enumerate the classification of curves in Engineering surveys
18.Explain the setting out of a simple curve by two theodolite method.
19.Explain  the setting  out of a simple  curve  by the  Rankines  method  of tangential angle
            20. Two straight AB and BC intersect at a chainage of 4242.0 m. The angle of intersection is 140°. It is required to set out a 5° simple circular curve to connect the straights. Calculate all the data necessary to set out the curve by the method of offsets from the chord produced with an interval of 30 m




CS2060 High Speed Networks Anna Univ Nov/Dec 2012 important Questions


Anna University, Chennai Nov/Dec 2012 Examinations
Rejinpaul.com Important Questions
CS2060 – High Speed Networks
Common To VII Sem ECE
Unit I-V

1.      With a neat sketch explain the various fields of an ATM cell
2.     List the various ATM service categories and explain them in detail
3.      Explain the architecture of 802.11
4.     Discuss the relevance of CSMA/CD in Gigabyte Ethernet
5.      Explain the fiber channel protocol architecture in detail
6.     Describe the single server queuing model with its structures and parameters
7.      List and explain the frame relay congestion control techniques
8.     Describe the queuing analysis and the various queuing models in the Network traffic management system
9.     Derive the expression for average delay faced by a packet entering the network which is modeled using M/M/1model
10. Discuss the traffic control, traffic management in ATM networks
                11.  Explain about the TCP retransmission timer management techniques in detail..
                12. Explain the Leaky Bucket· algorithm and compare with traffic shaping
                13.  Discuss the motivation and design goals of Random Early Detection scheduling policy
                14. Explain the Random Early Detection algorithm in terms of the estimation of queue size and determining packet discard
                 15.  Describe the components of a core router of Differentiated Services Network
                 16. Explain the ISA architecture in detail with  neat block diagram
                 17.  Explain the usage of RED algorithm in congestion management
                 18. Explain the design goals and characteristics of the Resource reservation Protocol in detail
                  19. Explain the RTP Protocol architecture and draw its header format
                 20. Explain the working of RTCP in detail.
                 21. Discuss the issues related to RSVP