## Thursday, March 12, 2015

### MA6452 Statistics and Numerical Methods Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University

MA6452 Statistics and Numerical Methods Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University MA6452 SNM Notes Syllabus 2 Marks with answers Part A Part B Problems Anna University Mechanical 4th Semester Common to all Departments - Regulation 2013 4th Semester Syllabus Notes

Anna University MA6452 Statistics and Numerical Methods Notes Syllabus 2 marks with answers Part A Question Bank with answers

Anna University MA6452 Statistics and Numerical Methods Syllabus Notes 2 marks with answer is provided below. MA6452 Notes Syllabus all 5 units notes are uploaded here. here MA6452 SNM Syllabus notes download link is provided and students can download the MA6452 Syllabus and Lecture Notes and can make use of it.

MA6452 STATISTICS AND NUMERICAL METHODS SYLLABUS REGULATION 2013

UNIT I TESTING OF HYPOTHESIS
Large sample test based on Normal distribution for single mean and difference of means - Tests based on t,  lamba^2 and F distributions for testing means and variances – Contingency table (Test for Independency) – Goodness of fit.

UNIT II DESIGN OF EXPERIMENTS
One way and two way classifications - Completely randomized design – Randomized block design – Latin square design - 22 factorial design.

UNIT III SOLUTION OF EQUATIONS AND EIGENVALUE PROBLEMS
Newton Raphson method – Gauss elimination method – pivoting – Gauss Jordan methods – Iterative methods of Gauss Jacobi and Gauss Seidel – Matrix inversion by Gauss Jordan method – Eigen values of a matrix by power method.

UNIT IV INTERPOLATION, NUMERICAL DIFFERENTIATION AND NUMERICAL INTEGRATION
Lagrange’s and Newton’s divided difference interpolations – Newton’s forward and backward difference interpolation – Approximation of derivates using interpolation polynomials – Numerical single and double integrations using Trapezoidal and Simpson’s 1/3 rules.

UNIT V NUMERICAL SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS
Taylor’s series method – Euler’s method – Modified Euler’s method – Fourth order Runge-Kutta method for solving first order equations – Milne’s predictor corrector methods for solving first order equations – Finite difference methods for solving second order equations.

Other Subjects related to Mechanical 4th Semester

MECH Regulation 2008 2nd 4th 6th 8th Semester Notes - Click here
MECH Regulation 2008 1st 3rd 5th 7th Semester Notes - Click here

CHECK ALSO
Anna University Regulation 2013 UG Syllabus - Click here

search by students

MA6452 Statistics and Numerical Methods Anna university 4th semester Regulation 2013 notes
Anna University Regulation 2013 4th Semester Notes
Regulation 2013 3rd Semester Notes Anna University
MA6452 Statistics and Numerical Methods Syllabus Notes 4th Semester- common for all Departments
MA6452 Statistics and Numerical Methods Notes Syllabus Question Papers Question Bank 2 marks with answers
Anna University MA6452 Mechanical Notes Syllabus Question Papers 2 marks with answers Part B Problems Regulation 2013
Anna University MA6452 Notes Syllabus Question Papers Question Bank 2 marks with answers
MA6452 Statistics and Numerical Methods Lecture Notes Subject Notes Anna University
Anna University Mechanical 4th Semester notes
Anna University chennai madurai,coimbatore 4th semester notes
Anna University 4th Semester notes Regulation 2013
Anna University MA6452 SNM 4th Semester Notes
Anna University 4th Semester Notes Regulation 2013
Anna University Regulation 2013 Mechanical 4th Semester Notes Syllabus Question Bank Question Papers
Anna University 4th semester Lecture Notes Syllabus Question Bank Regulation 2013

### ME6402 Manufacturing Technology– II Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University

ME6402 Manufacturing Technology– II Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University ME6402 MT II MT 2 Notes Syllabus 2 Marks with answers Mechanical 4th Semester - Regulation 2013 4th Semester Syllabus Notes

Anna University ME6402 Manufacturing Technology– II Notes Syllabus 2 marks with answers Part A Question Bank with answers Key - Mechanical 4th Semester

Anna University ME6402 Manufacturing Technology– II Syllabus Notes 2 marks with answer is provided below. ME6402 Notes Syllabus all 5 units notes are uploaded here. here ME6402 MT II  MT 2 Syllabus notes download link is provided and students can download the ME6402 Syllabus and Lecture Notes and can make use of it.

ME6402 MANUFACTURING TECHNOLOGY II SYLLABUS REGULATION 2013
UNIT I THEORY OF METAL CUTTING
Mechanics of chip formation, single point cutting tool, forces in machining, Types of chip, cutting tools – nomenclature, orthogonal metal cutting, thermal aspects, cutting tool materials, tool wear, tool life, surface finish, cutting fluids and Machinability.

UNIT II TURNING MACHINES
Centre lathe, constructional features, specification, operations – taper turning methods, thread cutting methods, special attachments, machining time and power estimation. Capstan and turret lathes- tool layout – automatic lathes: semi automatic – single spindle : Swiss type, automatic screw type – multi spindle:

UNITIII SHAPER, MILLING AND GEAR CUTTING MACHINES
Shaper - Types of operations. Drilling ,reaming, boring, Tapping. Milling operations-types of milling cutter. Gear cutting – forming and generation principle and construction of gear milling ,hobbing and gear shaping processes –finishing of gears.

UNIT IV ABRASIVE PROCESS AND BROACHING
Abrasive processes: grinding wheel – specifications and selection, types of grinding process– cylindrical grinding, surface grinding, centreless grinding and internal grinding- Typical applications – concepts of surface integrity, broaching machines: broach construction – push, pull, surface and continuous broaching machines

UNIT V CNC MACHINING
Numerical Control (NC) machine tools – CNC types, constructional details, special features,
machining centre, part programming fundamentals CNC – manual part programming –

micromachining – wafer machining

Other Subjects related to Mechanical 4th Semester

MECH Regulation 2008 2nd 4th 6th 8th Semester Notes - Click here
MECH Regulation 2008 1st 3rd 5th 7th Semester Notes - Click here

CHECK ALSO
Anna University Regulation 2013 UG Syllabus - Click here

search by students

ME6402 Manufacturing Technology– II Anna university 4th semester Regulation 2013 notes
Anna University Regulation 2013 4th Semester Notes
Regulation 2013 4th Semester Notes Anna University
ME6402 Manufacturing Technology– II Syllabus Notes Mech 4th Semester
ME6402 Manufacturing Technology– II Notes Syllabus Question Papers Question Bank 2 marks with answers
Anna University ME6402 Notes Syllabus Question Papers Question Bank 2 marks with answers
ME6402 Manufacturing Technology– II Lecture Notes Subject Notes Anna University
Anna University Mechanical 4th Semester notes
Anna University chennai madurai,coimbatore Mechanical 4th semester notes
Anna University 4th Semester notes Regulation 2013
Anna University ME6402 MT II Mech 4th Semester Notes
Anna University 4th Semester Notes Regulation 2013
Anna University Mech 4th Semester Notes Syllabus Question Bank Question Papers
Anna University 4th semester Lecture Notes Syllabus Question Bank Regulation 2013

### ME6403 Engineering Materials and Metallurgy Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University

ME6403 Engineering Materials and Metallurgy Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University ME6403 EMM Notes Syllabus 2 Marks with answers Mechanical 4th Semester - Regulation 2013 4th Semester Syllabus Notes

Anna University ME6403 Engineering Materials and Metallurgy Notes Syllabus 2 marks with answers Part A Question Bank with answers Key - Mechanical 4th Semester

Anna University ME6403 Engineering Materials and Metallurgy Syllabus Notes 2 marks with answer is provided below. ME6403 Notes Syllabus all 5 units notes are uploaded here. here ME6403 MT II  MT 2 Syllabus notes download link is provided and students can download the ME6403 Syllabus and Lecture Notes and can make use of it.

ME6403 ENGINEERING MATERIALS AND METALLURGY SYLLABUS REGULATION 2013

UNIT I ALLOYS AND PHASE DIAGRAMS
Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams, Isomorphous,eutectic, eutectoid, peritectic, and peritectoid reactions, Iron – carbon equilibrium diagram.Classification of steel and cast Iron microstructure, properties and application.

UNIT II HEAT TREATMENT
Definition – Full annealing, stress relief, recrystallisation and spheroidising – normalising, hardening and Tempering of steel. Isothermal transformation diagrams – cooling curves superimposed on I.T. diagram CCR – Hardenability, Jominy end quench test - Austempering, martempering – case hardening, carburizing, Nitriding, cyaniding, carbonitriding – Flame and Induction hardening – Vacuum
and Plasma hardening. .

UNIT III FERROUS AND NON-FERROUS METALS
Effect of alloying additions on steel- Î± and Î² stabilisers– stainless and tool steels – HSLA, Maraging steels – Cast Iron - Grey, white, malleable, spheroidal – alloy cast irons, Copper and copper alloys – Brass, Bronze and Cupronickel – Aluminium and Al-Cu – precipitation strengthening treatment – Bearing alloys, Mg-alloys, Ni-based super alloys and Titanium alloys.

UNIT IV NON-METALLIC MATERIALS
Polymers – types of polymer, commodity and engineering polymers – Properties and applications of various thermosetting and thermoplastic polymers (PP, PS, PVC, PMMA, PET,PC, PA, ABS, PI, PAI, PPO, PPS, PEEK, PTFE, Polymers – Urea and Phenol formaldehydes)- Engineering Ceramics – Properties and applications of Al2O3, SiC, Si3N4, PSZ and SIALON –Composites-Classifications- Metal Matrix and FRP - Applications of Composites.

UNIT V MECHANICAL PROPERTIES AND DEFORMATION MECHANISMS
Mechanisms of plastic deformation, slip and twinning – Types of fracture – Testing of materials under tension, compression and shear loads – Hardness tests (Brinell, Vickers and Rockwell), hardness tests, Impact test lzod and charpy, fatigue and creep failure mechanisms.

Other Subjects related to Mechanical 4th Semester

MECH Regulation 2008 2nd 4th 6th 8th Semester Notes - Click here
MECH Regulation 2008 1st 3rd 5th 7th Semester Notes - Click here

CHECK ALSO
Anna University Regulation 2013 UG Syllabus - Click here

search by students

ME6403 Engineering Materials and Metallurgy Anna university 4th semester Regulation 2013 notes
Anna University Regulation 2013 4th Semester Notes
Regulation 2013 4th Semester Notes Anna University
ME6403 Engineering Materials and Metallurgy Syllabus Notes Mech 4th Semester
ME6403 Engineering Materials and Metallurgy Notes Syllabus Question Papers Question Bank 2 marks with answers
Anna University ME6403 Notes Syllabus Question Papers Question Bank 2 marks with answers
ME6403 Engineering Materials and Metallurgy Lecture Notes Subject Notes Anna University
Anna University Mechanical 4th Semester notes
Anna University chennai madurai,coimbatore Mechanical 4th semester notes
Anna University 4th Semester notes Regulation 2013
Anna University ME6403 EMM Mech 4th Semester Notes
Anna University 4th Semester Notes Regulation 2013
Anna University Mech 4th Semester Notes Syllabus Question Bank Question Papers
Anna University 4th semester Lecture Notes Syllabus Question Bank Regulation 2013

### ME6404 Thermal Engineering Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University

ME6404 Thermal Engineering Syllabus Notes Question Papers 2 Marks with Answers Question Bank with answers Anna University ME6404 TE Notes Syllabus 2 Marks with answers Mechanical 4th Semester - Regulation 2013 4th Semester Syllabus Notes

Anna University ME6404 Thermal Engineering Notes Syllabus 2 marks with answers Part A Question Bank with answers Key - Mechanical 4th Semester

Anna University ME6404 Thermal Engineering Syllabus Notes 2 marks with answer is provided below. ME6404 Notes Syllabus all 5 units notes are uploaded here. here ME6404 TE Syllabus notes download link is provided and students can download the ME6404 Syllabus and Lecture Notes and can make use of it.

ME6404 THERMAL ENGINEERING SYLLABUS REGULATION 2013
UNIT I GAS POWER CYCLES
Otto, Diesel, Dual, Brayton cycles, Calculation of mean effective pressure, and air standard efficiency - Comparison of cycles.

UNIT II INTERNAL COMBUSTION ENGINES
Classification - Components and their function. Valve timing diagram and port timing diagram - actual and theoretical p-V diagram of four stroke and two stroke engines. Simple and complete Carburettor. MPFI, Diesel pump and injector system. Battery and Magneto Ignition System - Principles of Combustion and knocking in SI and CI Engines. Lubrication and Cooling systems. Performance calculation.

UNIT III STEAM NOZZLES AND TURBINES
Flow of steam through nozzles, shapes of nozzles, effect of friction, critical pressure ratio,
supersaturated flow. Impulse and Reaction principles, compounding, velocity diagram for simple and multi-stage turbines, speed regulations –Governors.

UNIT IV AIR COMPRESSOR
Classification and working principle of various types of compressors, work of compression with and without clearance, Volumetric efficiency, Isothermal efficiency and Isentropic efficiency of reciprocating compressors, Multistage air compressor and inter cooling –work of multistage air compressor.

UNIT V REFRIGERATION AND AIR CONDITIONING
Refrigerants - Vapour compression refrigeration cycle- super heat, sub cooling – Performance calculations - working principle of vapour absorption system, Ammonia –Water, Lithium bromide – water systems (Description only) . Air conditioning system - Processes, Types and Working Principles. - Concept of RSHF, GSHF, ESHF- Cooling Load calculations.

Other Subjects related to Mechanical 4th Semester

MECH Regulation 2008 2nd 4th 6th 8th Semester Notes - Click here
MECH Regulation 2008 1st 3rd 5th 7th Semester Notes - Click here

CHECK ALSO
Anna University Regulation 2013 UG Syllabus - Click here

search by students

ME6404 Thermal Engineering Anna university 4th semester Regulation 2013 notes
Anna University Regulation 2013 4th Semester Notes
Regulation 2013 4th Semester Notes Anna University
ME6404 Thermal Engineering Syllabus Notes Mech 4th Semester
ME6404 Thermal Engineering Notes Syllabus Question Papers Question Bank 2 marks with answers
Anna University ME6404 Notes Syllabus Question Papers Question Bank 2 marks with answers
ME6404 Thermal Engineering Lecture Notes Subject Notes Anna University
Anna University Mechanical 4th Semester notes
Anna University chennai madurai,coimbatore Mechanical 4th semester notes
Anna University 4th Semester notes Regulation 2013
Anna University ME6404 TE Mech 4th Semester Notes
Anna University 4th Semester Notes Regulation 2013
Anna University Mech 4th Semester Notes Syllabus Question Bank Question Papers
Anna University 4th semester Lecture Notes Syllabus Question Bank Regulation 2013