ME8594 Dynamics of Machines Syllabus Notes Question Banks with answers

ME8594 Dynamics of Machines Syllabus Notes Question Paper Question Banks with answers Anna University

Anna University Dynamics of Machines Syllabus Notes Question Bank Question Papers Regulation 2017

Anna University ME8594 Dynamics of Machines Notes are provided below. ME8594 Notes all 5 units notes are uploaded here. here ME8594 Dynamics of Machines notes download link is provided and students can download the ME8594 TE II Lecture Notes and can make use of it.
EC8251 Dynamics of Machines Syllabus Notes

ME8594 Dynamics of Machines Syllabus Regulation 2017

UNIT I STEAM NOZZLE
Types and Shapes of nozzles, Flow of steam through nozzles, Critical pressure ratio, Variation of mass flow rate with pressure ratio. Effect of friction. Metastable flow.
UNIT II BOILERS
Types and comparison. Mountings and Accessories. Fuels - Solid, Liquid and Gas. Performance calculations, Boiler trial.
UNIT III STEAM TURBINES
Types, Impulse and reaction principles, Velocity diagrams, Work done and efficiency – optimal operating conditions. Multi-staging, compounding and governing.
UNIT IV COGENERATION AND RESIDUAL HEAT RECOVERY
Cogeneration Principles, Cycle Analysis, Applications, Source and utilisation of residual heat. Heat pipes, Heat pumps, Recuperative and Regenerative heat exchangers. Economic Aspects.
UNIT V REFRIGERATION AND AIR – CONDITIONING
Vapour compression refrigeration cycle, Effect of Superheat and Sub-cooling, Performance calculations, Working principle of air cycle, vapour absorption system, and Thermoelectric refrigeration. Air conditioning systems, concept of RSHF, GSHF and ESHF, Cooling load calculations. Cooling towers – concept and types.
Click below link to download Dynamics of Machines Syllabus Notes Question papers Question Banks 2 marks with answers Part B Questions with answers download.

ME8594 Notes 1 link download - Click here
ME8594 Notes 2 link download - Click here
ME8594 Notes 3 link download - Click here
ME8594 Question Bank download - click here
ME8594 Two Marks with Answers download - click here

If you have any problem in downloading the above material, you can comment below.
Other useful links:
Anna University internal Marks Out of 20 check here
Anna University Notes download for all Department - Click here to download
Anna University Previous year Question Paper Collections - Click Here
Check Anna University results updates
UG Syllabus regulation 2017 - Click here
PG Syllabus regulation 2017 - Click here
Anna University Result date - Click here to check
Anna University results link 2 - Click here
Search by students
ME8594 Dynamics of Machines Regulation 2017 notes
Anna university UG Notes
Anna University Regulation 2017 Notes Syllabus
Regulation 2017 Syllabus Notes Anna University
ME8594 Dynamics of Machines Notes Syllabus
ME8594 Dynamics of Machines Notes
ME8594 Dynamics of Machines Syllabus
ME8594 Dynamics of Machines Question papers
ME8594 Dynamics of Machines Question Bank
Share:

ME8501 Metrology and Measurements Syllabus Notes Question Banks with answers

ME8501 Metrology and Measurements Syllabus Notes Question Paper Question Banks with answers Anna University

Anna University Metrology and Measurements Syllabus Notes Question Bank Question Papers Regulation 2017

Anna University ME8501 Metrology and Measurements Notes are provided below. ME8501 Notes all 5 units notes are uploaded here. here ME8501 Metrology and Measurements notes download link is provided and students can download the ME8501 MM Lecture Notes and can make use of it.
EC8251 Metrology and Measurements Syllabus Notes

ME8501 Metrology and Measurements Syllabus Regulation 2017

UNIT I BASICS OF METROLOGY
Introduction to Metrology – Need – Elements – Work piece, Instruments – Persons – Environment – their effect on Precision and Accuracy – Errors – Errors in Measurements – Types – Control – Types of standards.
UNIT II LINEAR AND ANGULAR MEASUREMENTS
Linear Measuring Instruments – Evolution – Types – Classification – Limit gauges – gauge design – terminology – procedure – concepts of interchange ability and selective assembly – Angular measuring instruments – Types – Bevel protractor clinometers angle gauges, spirit levels sine bar – Angle alignment telescope – Autocollimator – Applications.
UNIT III ADVANCES IN METROLOGY
Basic concept of lasers Advantages of lasers – laser Interferometers – types – DC and AC Lasers interferometer – Applications – Straightness – Alignment. Basic concept of CMM – Types of CMM – Constructional features – Probes – Accessories – Software – Applications – Basic concepts of Machine Vision System – Element – Applications.
UNIT IV FORM MEASUREMENT
Principles and Methods of straightness – Flatness measurement – Thread measurement, gear measurement, surface finish measurement, Roundness measurement – Applications.
UNIT V MEASUREMENT OF POWER, FLOW AND TEMPERATURE
Force, torque, power - mechanical , Pneumatic, Hydraulic and Electrical type. Flow measurement: Venturimeter, Orifice meter, rotameter, pitot tube – Temperature: bimetallic strip, thermocouples, electrical resistance thermometer – Reliability and Calibration – Readability and Reliability.
Click below link to download Metrology and Measurements Syllabus Notes Question papers Question Banks 2 marks with answers Part B Questions with answers download.

ME8501 Notes 1 link download - Click here
ME8501 Notes 2 link download - Click here
ME8501 Notes 3 link download - Click here
ME8501 Question Bank download - click here
ME8501 Two Marks with Answers download - click here

If you have any problem in downloading the above material, you can comment below.
Other useful links:
Anna University internal Marks Out of 20 check here
Anna University Notes download for all Department - Click here to download
Anna University Previous year Question Paper Collections - Click Here
Check Anna University results updates
UG Syllabus regulation 2017 - Click here
PG Syllabus regulation 2017 - Click here
Anna University Result date - Click here to check
Anna University results link 2 - Click here
Search by students
ME8501 Metrology and Measurements Regulation 2017 notes
Anna university UG Notes
Anna University Regulation 2017 Notes Syllabus
Regulation 2017 Syllabus Notes Anna University
ME8501 Metrology and Measurements Notes Syllabus
ME8501 Metrology and Measurements Notes
ME8501 Metrology and Measurements Syllabus
ME8501 Metrology and Measurements Question papers
ME8501 Metrology and Measurements Question Bank
Share:

ME8593 Design of Machine Elements Syllabus Notes Question Banks with answers

ME8593 Design of Machine Elements Syllabus Notes Question Paper Question Banks with answers Anna University

Anna University Design of Machine Elements Syllabus Notes Question Bank Question Papers Regulation 2017

Anna University ME8593 Design of Machine Elements Notes are provided below. ME8593 Notes all 5 units notes are uploaded here. here ME8593 Design of Machine Elements notes download link is provided and students can download the ME8593 DME Lecture Notes and can make use of it.
EC8251 Design of Machine Elements Syllabus Notes

ME8593 Design of Machine Elements Syllabus Regulation 2017

UNIT I STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS
Introduction to the design process - factors influencing machine design, selection of materials based on mechanical properties - Preferred numbers, fits and tolerances – Direct, Bending and torsional stress equations – Impact and shock loading – calculation of principle stresses for various load combinations, eccentric loading – curved beams – crane hook and ‘C’ frame- Factor of safety - theories of failure – Design based on strength and stiffness – stress concentration – Design for variable loading.
UNIT II SHAFTS AND COUPLINGS
Design of solid and hollow shafts based on strength, rigidity and critical speed – Keys, keyways and splines - Rigid and flexible couplings.
UNIT III TEMPORARY AND PERMANENT JOINTS
Threaded fastners - Bolted joints including eccentric loading, Knuckle joints, Cotter joints – Welded joints, riveted joints for structures - theory of bonded joints.
UNIT IV ENERGY STORING ELEMENTS AND ENGINE COMPONENTS
Various types of springs, optimization of helical springs - rubber springs - Flywheels considering stresses in rims and arms for engines and punching machines- Connecting Rods and crank shafts.
UNIT V BEARINGS
Sliding contact and rolling contact bearings - Hydrodynamic journal bearings, Sommerfeld Number, Raimondi and Boyd graphs, -- Selection of Rolling Contact bearings.
Click below link to download Design of Machine Elements Syllabus Notes Question papers Question Banks 2 marks with answers Part B Questions with answers download.

ME8593 Notes 1 link download - Click here
ME8593 Notes 2 link download - Click here
ME8593 Notes 3 link download - Click here
ME8593 Question Bank download - click here
ME8593 Two Marks with Answers download - click here

If you have any problem in downloading the above material, you can comment below.
Other useful links:
Anna University internal Marks Out of 20 check here
Anna University Notes download for all Department - Click here to download
Anna University Previous year Question Paper Collections - Click Here
Check Anna University results updates
UG Syllabus regulation 2017 - Click here
PG Syllabus regulation 2017 - Click here
Anna University Result date - Click here to check
Anna University results link 2 - Click here
Search by students
ME8593 Design of Machine Elements Regulation 2017 notes
Anna university UG Notes
Anna University Regulation 2017 Notes Syllabus
Regulation 2017 Syllabus Notes Anna University
ME8593 Design of Machine Elements Notes Syllabus
ME8593 Design of Machine Elements Notes
ME8593 Design of Machine Elements Syllabus
ME8593 Design of Machine Elements Question papers
ME8593 Design of Machine Elements Question Bank
Share:

Tamil Nadu 11th Time Table 2020 PDF Released - TN HSC 1st Year Time Table 2020 PDF Download

Tamil Nadu 11th Time Table 2020 PDF Released - TN HSC 1st year Time Table 2020 PDF Download

Tamil Nadu 11th Time Table 2020 got released on the official website at dge.tn.gov.in. Tamil Nadu Directorate of Government Education has announced TN HSC 1st year Time Table 2020. As per Notification released, Board Exams for all Class 11th Students will be held from March 4, 2020 to March 26, 2020. Download TN HSC First Year Time Table 2020 PDF directly from dge.tn.gov.in.
Tamil Nadu 11th Time Table 2020 PDF - rejinpaul.com
Tamil Nadu HSC 1st year Time Table 2020


TN HSC 11th Public Examination March 2020 - Tamil Nadu +1 Time Table 2020


DATE DAY SESSION SUBJECT
04.03.2020 WEDNESDAY F.N. LANGUAGE
06.03.2020 FRIDAY F.N. ENGLISH
11.03.2020 WEDNESDAY F.N. MATHEMATICS/ ZOOLOGY COMMERCE/ MICRO BIOLOGY/ NUTRITION DIETETICS/ TEXTILES & DRESS DESIGNING/ FOOD SERVICE MANAGEMENT/ AGRICULTURAL SCIENCE/ NURSING ( GENERAL) / NURSING VOCATIONAL
13.03.2020 FRIDAY F.N. COMMUNICATIVE ENGLISH/ETHICS AND INDIAN CULTURE/ COMPUTER SCIENCE/ COMPUTER APPLICATIONS/BIO-CHEMISTRY / ADVANCED LANGUAGE ( TAMIL ) / HOME SCIENCE/ POLITICAL SCIENCE/ STATISTICS
18.03.2020 WEDNESDAY F.N. PHYSICS/ECONOMICS/COMPUTER TECHNOLOGY
23.03.2020 MONDAY F.N. BIOLOGY/ BOTANY/ HISTORY / BUSINESS MATHEMATICS AND STATISTICS /BASIC ELECTRICAL ENGINEERING/BASIC ELECTRONICS ENGINEERING/ BASIC CIVIL ENGINEERING/ BASIC AUTOMOBILE ENGINEERING/ BASIC MECHANICAL ENGINEERING/ TEXTILE TECHNOLOGY/ OFFICE MANAGEMENT AND SECRETARYSHIP
26.03.2020 THURSDAY F.N. CHEMISTRY/ACCOUNTANCY/ GEOGRAPHY
Candidates belong to the academic year of 2019-2020 can check the timetable in order to start their preparations for the board exam. Further details about Tamil Nadu 12th Public Exam Time Table 2020 Students can download Tamil Nadu Class XII Time Table 2020 PDF from official website. Please find the below Exam time details.

Tamil Nadu HSC Examination 2020 time details
Duration of Examination 2 1/2 Hours
Examinations commence time 10.00 a.m.
Examinations End time 12.45 p.m.
10.00 a.m. to 10.10 a.m. Reading the question paper
10.10 a.m. to 10.15 a.m. Verification of particulars by the candidates
10.15 a.m. to 12.45 p.m. Duration of the examination



Steps to download TN Class 11 Time Table 2020
  • Go to the official website - https://dge.tn.gov.in
  • Click on Link "TAMIL NADU HSC +1 TIME TABLE 2020" to download PDF.
  • Save a copy for future reference.
Official website to download TN 11th Date Sheet 2020 PDF - dge.tn.gov.in
Related Links
TN SSLC Results 2020 updates Check here
Incoming Search terms:
Tamil Nadu Board 11th Time Table 2020
Tamil Nadu 11th Time Table 2020
TN 11th Time Table 2020 PDF
Tamil Nadu HSC +1 Date Sheet 2020 PDF
DGE Class 11th Time Table 2020
Tamil Nadu 11th Time Table 2020
Tamil Nadu HSC 1st year Time Table 2020
Tamil Nadu +1 Date Sheet 2020
Share:

ME8595 Thermal Engineering II Syllabus Notes Question Banks with answers

ME8595 Thermal Engineering II Syllabus Notes Question Paper Question Banks with answers Anna University

Anna University Thermal Engineering II Syllabus Notes Question Bank Question Papers Regulation 2017

Anna University ME8595 Thermal Engineering II Notes are provided below. ME8595 Notes all 5 units notes are uploaded here. here ME8595 Thermal Engineering II notes download link is provided and students can download the ME8595 TE II Lecture Notes and can make use of it.
EC8251 Thermal Engineering II Syllabus Notes

ME8595 Thermal Engineering II Syllabus Regulation 2017

UNIT I STEAM NOZZLE
Types and Shapes of nozzles, Flow of steam through nozzles, Critical pressure ratio, Variation of mass flow rate with pressure ratio. Effect of friction. Metastable flow.
UNIT II BOILERS
Types and comparison. Mountings and Accessories. Fuels - Solid, Liquid and Gas. Performance calculations, Boiler trial.
UNIT III STEAM TURBINES
Types, Impulse and reaction principles, Velocity diagrams, Work done and efficiency – optimal operating conditions. Multi-staging, compounding and governing.
UNIT IV COGENERATION AND RESIDUAL HEAT RECOVERY
Cogeneration Principles, Cycle Analysis, Applications, Source and utilisation of residual heat. Heat pipes, Heat pumps, Recuperative and Regenerative heat exchangers. Economic Aspects.
UNIT V REFRIGERATION AND AIR – CONDITIONING
Vapour compression refrigeration cycle, Effect of Superheat and Sub-cooling, Performance calculations, Working principle of air cycle, vapour absorption system, and Thermoelectric refrigeration. Air conditioning systems, concept of RSHF, GSHF and ESHF, Cooling load calculations. Cooling towers – concept and types.
Click below link to download Thermal Engineering II Syllabus Notes Question papers Question Banks 2 marks with answers Part B Questions with answers download.

ME8595 Notes 1 link download - Click here
ME8595 Notes 2 link download - Click here
ME8595 Notes 3 link download - Click here
ME8595 Question Bank download - click here
ME8595 Two Marks with Answers download - click here

If you have any problem in downloading the above material, you can comment below.
Other useful links:
Anna University internal Marks Out of 20 check here
Anna University Notes download for all Department - Click here to download
Anna University Previous year Question Paper Collections - Click Here
Check Anna University results updates
UG Syllabus regulation 2017 - Click here
PG Syllabus regulation 2017 - Click here
Anna University Result date - Click here to check
Anna University results link 2 - Click here
Search by students
ME8595 Thermal Engineering II Regulation 2017 notes
Anna university UG Notes
Anna University Regulation 2017 Notes Syllabus
Regulation 2017 Syllabus Notes Anna University
ME8595 Thermal Engineering II Notes Syllabus
ME8595 Thermal Engineering II Notes
ME8595 Thermal Engineering II Syllabus
ME8595 Thermal Engineering II Question papers
ME8595 Thermal Engineering II Question Bank
Share: